We have detected that you do not have
a current Flash Player installed or your Flash Player needs to be upgraded.
Please visit Adobe.com here and follow the instructions to install the latest Flash Player.
The low voltage Altair Powerlouvre™ Window has been designed to electronically manage
cross ventilation and natural airflow into the home.
Displaying superior aesthetics with no visual indication of
any motors or automated device, the Powerlouvre™ Window is compatible with wall switches right through to home
automation systems to suit a range of budgets and control needs.
Altair Powerlouvre™ Windows are available in the Breezway Easyscreen™ Window System. Delivered to site fully assembled, the Powerlouvre™ Window removes the complexity of sourcing special trades to install motors or program the system.
The Powerlouvre™ Window can also be made available in Component Form to approved Window Fabricators for installation into flat commercial frames or timber frames.
Operating Methods The Altair Powerlouvre™ Window can be controlled by a simple wall switch or the Breezway Remote Control System.
The device allows blades to be stopped in any intermediate position throughout the duration of the open/close cycle.
For more information on the new Remote Control System, please go to the Powerlouvre™ Remote Control page.
Powerlouvre™ Windows that are 2-9 blades high contain one motor per bay and are wired such that the entire window opens and closes simultaneously. Powerlouvre™ Windows that are 10-18 blades high contain two motors per bay; one motor drives the blades in the top bank of the window and the other motor drives the blades in the bottom bank of louvres. Powerlouvre ™ Windows with 10-18 blades are wired such that the bays of louvres in the top bank open and close simultaneously and the louvres in the bottom bank open and close simultaneously.
To view a copy of the standard opening configurations, please download the Powerlouvre section of the Breezway Design Manual.
The Altair Powerlouvre™ Window has undergone a series of tests including cyclical open/close, salt mist tests, humidity and extreme temperature testing. Please refer to the Powerlouvre section in the Design Manual for test results.
Please keep in mind that the Powerlouvre™ Window has no integrated battery back up. If the power supply fails, the window cannot be operated. Therefore, if battery back up is required in areas with unreliable power supply, systems are readily available and can be integrated by qualified suppliers.
Breezway Powerlouvre™ Windows should be operated at monthly intervals. Frames should be cleaned periodically as per Breezway recommendations. Please visit the Care and Maintenance page on our website for more information.
For information on standard heights and bay width restrictions, please refer to the Sizes page.
For information about specification and configurations, please download a copy of the Powerlouvre section of the Breezway Design Manual.
No worries! Download our current Breezway Ideas Brochure (4MB)
Enter your Australian post code below to locate your nearest location. For more details or locations outside of Australia visit the Where to View or Buy page.
Enter your Australian post code below to locate your nearest location. For more details or locations outside of Australia visit the Where to View or Buy page.
© 2010 Breezway Australia Pty Ltd, ABN 24 081897823, ™ Denotes a Trademark owned by Breezway Australia Pty Ltd